Free Shipping Over $150 to anywhere in Australia (03) 9330 2177

Pinnacle XMT Intermediate SMR

Pinnacle Natural Brilliance - XMT3100

or make 4 interest-free payments of $11.46
fortnightly with Afterpay More info

First, do no harm. Pinnacle XMT Intermediate Swirl Remover works on the principle of doing only what's required to restore the damaged paint. Precisely milled abrasives, and a lot of them, blend away moderate to severe blemishes without removing significant layers of clear coat. Since clear coats are extremely thin, these Concentrated Micro Abrasives preserve as much of the paint as possible while removing only the defect. Lose the swirls, keep the gloss.

Even though Pinnacle XMT Intermediate Swirl Remover is less abrasive than a traditional compound, it removes the same imperfections: moderate to severe swirls, moderate scratches, oxidation, water spots, and overspray. The abrasives gradually diminish as they work, giving you a built-in finishing polish. The paint will experience little or no loss of surface gloss. In most cases, you will not need to use a separate finishing polish. There are some scratches that can only be removed by a professional. If the scratch extends all the way to the color coat, removing the scratch requires removing the entire clear coat surrounding the scratch. Unless you intend to repaint the vehicle, this is an impractical solution for at-home detailers.

Pinnacle XMT Intermediate Swirl Remover is formulated to remove blemishes without jeopardizing the paint system. It's a real world approach to at-home paint care. XMT swirl removers give you the best finish possible with none of the risk. For those blemishes that can't be removed, XMT Intermediate Swirl Remover will dramatically improve their appearance. Conceal them with Pinnacle XMT Carnauba Finishing Glaze as your final step product. Pinnacle XMT Intermediate Swirl Remover is VOC compliant, body shop safe and silicone-free. Apply XMT Intermediate Swirl Remover with a light cutting pad on your random orbital polisher. Set the maximum speed to 5000 or 5500 OPM. For the easiest application, mist the pad with Pinnacle XMT Polishing Pad Conditioner before applying the swirl remover. Pour a ten cent size amount of the product onto the pad and spread it onto a section of paint. Turn the polisher on and work the swirl remover into the paint until it begins to dry or disappear.

XMT Intermediate Swirl Remover contains no fillers so you can see the results of your work. Buff with a microfiber towel.

You May Also Like