A low-foaming carpet and fabric extraction fluid built to remove embedded grime, stains, and odours - while killing mould and bacteria at the source.
MIRCH Erebus Blast is a powerful extraction fluid built for deep cleaning carpet and fabric surfaces - removing embedded soil, eliminating odours, and killing bacteria and mould at the source.
It’s formulated with advanced soil encapsulation chemistry to lift and suspend contamination for easy removal during the extraction process. Whether you’re tackling foot traffic areas, coffee spills, or lingering odours, Erebus Blast breaks down what’s hidden and pulls it to the surface for a clean that goes far beyond the fibres.
Biocidal additives target odour-causing bacteria and mould, helping to neutralise the issue rather than just mask it. That makes Erebus Blast especially effective for older interiors, high-traffic mats, or vehicles exposed to moisture and organic buildup.
Designed specifically for machine extraction, the formula is low-foaming - so it works efficiently in wet vacs, carpet machines, and interior shampoo systems without clogging or over-sudsing. It rinses clean, dries down fast, and doesn’t leave behind sticky residue or synthetic gloss.
Whether you’re restoring fleet vehicles or detailing your own, Erebus Blast brings deep fabric care with professional performance - uncovering clarity where the darkness once settled.
-
From the depth of night, Erebus rises - blasting through dirt & grime embedded in fabric and fibre, erasing what clings below the surface.
Features:
- Deep Cleaning & Soil Encapsulation - Lifts and suspends embedded grime, making it easy to extract contaminants from carpet and fabric.
- Biocidal Odour Elimination - Kills mould, mildew, and bacteria at the source - stopping odours rather than covering them up.
- Low-Foaming for Machine Use - Engineered for wet vacs and extraction machines, with minimal suds for smooth operation and fast drying.
-
No Residue or Sticky Finish - Rinses clean without leaving behind slickness or artificial shine - just dry, fresh-feeling fibres.
Directions:
- Shake well before use.
- Dilute according to soil level and machine requirements - typically 1:20 for light cleaning or 1:10 for heavier jobs. For machine use, usually looking between 1:30 - 1:50.
- Fill your extraction machine with the prepared solution.
- Apply evenly to fabric or carpeted surfaces using your machine's spray function.
- Allow the product to dwell for 2–3 minutes for optimal cleaning and biocidal action.
- Extract thoroughly, then allow the area to air dry or use a blower for faster results.
For spot treatments, you may spray and agitate manually before extraction.