Inside Look at the New AR630+ Pressure Washer
The AR630+ is the most advanced, professional-grade pressure washer we’ve ever offered.
After 8+ months of close development with the Annovi Reverberi team in Italy, we’ve custom-tuned this machine to deliver serious commercial performance - while staying refined enough for the demands of professional detailing. It’s powerful, reliable, and loaded with hardware you'd normally only see in units twice the price — including a full Italian-made triplex pump, ceramic plungers, 1450RPM brushless motor, and a tested 10L/min of real-world flow.
Designed to run hard, run cool, and run every day - the AR630+ is a genuine upgrade over spec-pumped or throwaway commercial lookalikes. It’s not just built strong - it’s built smart, and it’s built to last.
Meet The AR630+
The AR630+ is a fully Italian-made unit that’s been purpose-built from the ground up for industrial-level performance, day-in, day-out reliability, and real-world detailing use.
It’s running a 10L/min flow rate, a max pressure of 1850 PSI, and powered by a slow-speed 1450RPM induction motor. Under the hood, you’ll find a seriously upgraded triplex crankshaft pump with a full brass head and new ceramic plungers — proper industrial spec gear, designed to run hard without breaking a sweat.
But this isn’t just about brute strength — the AR630+ is refined, balanced, and tuned to deliver smoother operation, lower stress on components, and better performance where it counts.
We've teamed up with the engineers at Annovi Reverberi to dial in the flow rate, optimise tolerances, and get that real usable output that makes all the difference for detailers. Whether you’re rinsing heavy grime, running a foam cannon, or washing back-to-back vehicles — this unit just keeps delivering.
And with advanced features like True Total System Stop, dual-mode operation for long continuous runs, and a heavy-duty, fully serviceable build — the AR630+ isn’t just a pressure washer. It’s the foundation for a full professional setup.
Built to Perform & Last
At the heart is the latest-generation Italian-made AR triplex crankshaft pump. This is a full brass-body unit, completely rebuildable, and upgraded with long-stroke ceramic plungers - designed to handle sustained use, reduce internal heat, and deliver a smoother, more consistent output. It’s a serious step up from axial, wobble plate or even generic triplex designs. No shortcuts, no compromise.
That’s paired with a 1450RPM low-speed brushless induction motor, which pushes 10L/min of flow at a tested 1550 working PSI. The slower revving design cuts down internal wear, keeps the noise levels lower, and runs far cooler than high-speed motors - especially over long sessions or in warm conditions.
Every part of the system is serviceable. No sealed plastic housings or glued-together internals — just proper components, assembled with longevity in mind. You can replace seals, valves, pistons — whatever wears out, it’s made to be fixed, not thrown away.
And when you step back and look at what’s inside the AR630+, it’s not just impressive for the price — it’s a setup that wouldn’t be out of place in a unit twice the cost.
Custom Tuned for Detailing
We worked directly with the Annovi Reverberi engineering team in Italy for over 8 months, focusing on refining the internal tolerances, pressure curve, and flow characteristics of the AR630 platform.
The tuning allows the AR630+ to push out a real 10L/min flow rate, even on standard 10 amp power. That might not sound wild at first glance, but in detailing, flow is king. More flow means quicker, more effective rinsing. It means thicker, more consistent foam output from your cannon. And it means better coverage — less overlap, less effort.
Pressure matters, sure. But uncontrolled, high PSI just kicks back and adds stress. The AR630+ gives you a stable, optimised pressure range that delivers real cleaning power without being aggressive on surfaces — perfect for all detailing jobs.
The AR630+ Kits
The AR630+ is a beast on its own — but it also forms the base for some of the most versatile wash setups we've ever built. Whether you're running mobile, studio, or workshop, there's a 630+ kit ready to go.
- Essentials Kit: A streamlined setup to get you started, including upgraded fittings, short gun, and hose.
- Pro Upgrade Kit (Trolley): Adds portability with a full stainless trolley, reel, and high-grade hose.
- Pro Wall Mount Kit: Designed for garage or studio installs — clean, compact, and professional.
And if you want to customise further, we’ve got a full range of foam cannon, MTM short guns, nozzles, reels and mounting hardware to dial things in exactly how you want. The main AR630+ unit also supports full bypass operation, making it ideal for bulk washing or continuous-use setups without added strain.
