The Waxit Karcher K Hose Adaptor Kit gets you connected to your new upgraded hose quick and easy.

If you're wanting to get rid of the cheap plastic hose your machine uses, or maybe you just want to upgrade your high pressure hose to an Uberflex. You'll need some adaptors to get it going, so we've got a Karcher K fitting kit that's already been researched for you so you can upgrade your setup easily. 

There are two different fitting kits to choose from. If you're only changing your Karcher K hose and keeping the stock short gun, you just need the Karcher K Standard Kit which includes 2x male adaptors for each end of the hose to get you going.

If you've already got an existing upgraded short gun like the MTM SG35 and are now looking at upgrading your hose, you'll want the 3/8" Adaptor kit variant to connect you up to your gun. 

Compatibility:

• Tested and made for non integrated hose reel Karcher K models such as:
  • K2 Models (Non HR)
  • K3 Models (Non HR & Premium)
  • K4 Models (Non Premium & Power Control)
  • K5 Models (Non Premium & Power Control)
  • K6 Models
  • K7 Models (Non Premium & Power Control)
• Based off current Australian 25-26 models

If you're looking for Karcher HD Hose Fittings, you may want to check these fitting kits out instead. 

Features:

• High quality brass for durability: Well made brass fittings to last through every detail.
• Turnkey Upgrade for M22 14mm Hoses: Converts the standard ends on Uberflex or aftermarket pressure hoses into a full convenient upgraded system.

Pressure Hose Adaptor Kits:

• Karcher K Standard Hose Fitting Kit
  • 2x Karcher K Male Adaptors (M22 14mm)
    • Connect each end to an M22 14mm female hose
    • These fittings will not work with an integrated hose reel (Internally Plumbed)
• Karcher K Standard to 3/8" QC Female Fitting Kit
  • 1x Karcher K Male Adaptor (M22 14mm)
  • 1x 3/8" QC Female Adaptor (M22 14mm)
  • These fittings will not work with an integrated hose reel (Internally Plumbed)

Directions:

1. Karcher K Standard
   1. Screw in each fitting into each end of your M22 14mm female hose.
   2. Connect back into your pressure washer to test fitment, and do the same for the Karcher Gun.
   3. Should any leaks be present, use any PFTE water proofing tape to help create a better seal for the threads of the adaptors. 
2. Karcher K to 3/8" QC
   1. Screw in each fitting into each end of your M22 14mm female hose.
   2. One end will connect to your Karcher K pressure washer, and the other will be the receiving QC end for your MTM or other 3/8" short gun. Test fitment on both sides. 
   3. Should any leaks be present, use any PFTE water proofing tape to help create a better seal for the threads of the adaptors.