A spray-on, rinse-off sealant that delivers true SiO₂ protection in seconds - fast to apply, tough to break, and built to last.
MIRCH Hydra is a spray-on, rinse-off sealant built to deliver real protection with minimal effort - fortified by the same high-performance silica matrix found in KING.
It’s engineered to create a durable, slick layer across paint, wheels, trims, and hard-to-reach areas in seconds. Once applied, it chemically bonds to the surface - repelling water, resisting grime, and standing up to repeated contact with detergents and cleaning agents.
While most spray-on waxes fade after a few washes, Hydra holds its ground for months.
But the beauty of Hydra is how little it asks from you. There’s no layering, no levelling, and no waiting. Simply mist it on after your wash, then rinse it off, and let the surface flash clean. It’s fast, forgiving, and flexible enough to use as a standalone coating or a maintenance top-up.
The result is a surface that stays cleaner, feels slicker, and reflects light with renewed clarity - all without ever needing to touch a towel. Whether you’re protecting tight wheel barrels or chasing a fast full-body seal, Hydra gives you real coating performance that keeps coming back.
-
The Hydra symbolises power & resilience - cut one head, two return. It forms a shield with no weak point, sealing the surface in protection that won’t back down.
Features:
- Spray-On, Rinse-Off Simplicity - Applies in seconds - no buffing, levelling, or curing. Just mist, rinse, and you’re done.
- Durable SiO₂-Based Protection - Uses the same advanced silica matrix found in KING, offering serious protection in a quick-apply format.
- Extreme Hydrophobic Performance - Repels water, grime, and chemical cleaners with ease - keeping surfaces cleaner, longer.
- Ideal for Hard-to-Reach Areas - Perfect for wheels, grilles, trim, and other spots where traditional sealants fall short.
-
Use Standalone or as a Booster - Acts as a tough, standalone coating or as a maintenance layer over waxes, sealants, or ceramic coatings.
Directions:
- Wash and rinse the vehicle thoroughly.
- While the surface is still wet, lightly mist Hydra onto one panel at a time.
- Immediately rinse off with strong water pressure to activate the coating and remove excess product.
- Move methodically around the vehicle, working panel by panel.
- Once complete, dry the vehicle as usual using a microfibre drying towel or blower.
Do not apply in direct sunlight or on hot panels. Avoid using it on a dry surface. For best results, use after a pre-wash or contact wash and avoid applying too heavily - less is more with Hydra.