April BOGOS!
Buy Carpro Cquartz UK 50ml and Receive a FREE 1L Carpro Eraser!
BOGO CarPro Cquartz UK 50ml + CarPro Eraser 1L
BOGO-UKEraser1L
Item is in stockHurry! Low inventoryItem is out of stock
Item is unavailable
Shipping available in AUS and NZ only.
NT/WA/QLD/TAS
Australia Post Express (1-4 Business Days)
Australia Post Parcel Post (2-8 Business Days)
NSW/SA/ACT
Australia Post Express (1-4 Business Days)
Australia Post Parcel Post (2-8 Business Days)
CouriersPlease Road Express (1-3 Business Days)
VIC
Australia Post Express (1-3 Business Days)
Australia Post Parcel Post (2-5 Business Days)
CouriersPlease Road Express (0-3 Business Days)
Please note, the above timeframes are estimates. You may receive your parcel outside the estimated timeframe. Please check with Australia Post/CouriersPlease for issues that may affect your delivery schedule.
Items that are purchased from our online store can be returned within 14 days from when you receive your order for a refund or credit. The items that are returned must be unopened, and in resalable condition. Refunds will be processed once we have received the items.
If an item does not meet these standards, the returned items will be shipped back to the sender at the sender's expense.
The sender must include their order information inside the parcel otherwise the refund process will be delayed as investigate who it is from.
About The Products
-
Carpro Cquartz UK Edition is an innovative, ceramic coating that brings your vehicle into new aesthetic and protective heights. By applying Cquartz UK to your vehicle you are giving it a sacrificial semi-permanent glass layer that will give a gloss level that is unmatched by conventional polymer and organic wax based protectants. CQuartz will not simply wash off like traditional paint sealants and will, in fact, resist harsh chemical based cleaners. See why its one of the worlds most popular Ceramic Coatings! The free BOGO CarPro Eraser was initially developed as a pre-cleaner to remove all the oils from the paintwork to prepare the surface for CQuartz coatings. Regular IPA's have been known to have a high evaporation rate, which only lifts oils to the surface without efficiently removing them. Eraser will ensure a durable bond between your paintwork and Cquartz UK.
-
CarPro Cquartz UK 3.0
- Immense gloss, ultimate "wet look".
- Durability of years, not months
- Increased resistance to water spotting
- Increased resistance to all contaminants and traffic film
- Resistance to light scratching
- 70% SiO2 Content
- Use as a final wipe down before applying waxes, coatings or sealants
- Safe to use on all exterior surfaces
- Can be used to clean glass surfaces
- Does not contain Silicone additives, Panel Beater and Detailer friendly
- Softly scented (Unlike conventional IPA wipes)
-
CarPro Cquartz UK 3.0 For the best results, the surface must be prepared meticulously. All surfaces must be thoroughly washed, and decontaminated with iron removers/clay bars. Any defects existing in the paintwork will be 'locked in' by the coating, therefore you will want to under go paint correction where necessary to ensure your car will look its best when protected. 1. Ensure the car has been meticulously decontaminated (even if the car is new) with iron removers, and a clay bar & lubricant. You can combine both these steps with a clay lubricant called Nv Purify. 2. Perform machine polishing if necessary. If you don't own a machine or compounds, a great kit for beginners is the ShineMate EX603 12mm DA Polisher Kit. You can prime the surface with a finishing polish specific for CQUARTZ, which is the CarPro Essence. 3. Wipe the car down with CarPro Eraser before applying the coating. 4. Take out the applicator block and a suede MF towel from the kit and pour 5-6 drops of Cquartz UK. 5. Apply to the surface area in a criss cross pattern in small sections, reapplying Cquartz UK to your applicator as necessary 6. Allow curing time of 15 seconds - 1 minute. When the weather is warmer, you are wiping off straight away. When it is colder, you can leave the product for up to 1 minute before wiping off. 7. Wipe off the residue with a cloth such as BREEZE 8. Once you have visibly removed all product residue from the surface, follow up a fresh suede towel from the kit in the same pattern you applied the product to ensure it's completely level and even. 9. Repeat the process until the entire vehicle exterior is coated. Wait 1 hour before layering with another application of CQuartz UK or Reload, otherwise wait 24 hours if you miss that window.
-
FREE PRODUCT!
What's Included!
