DLUX is a semi-permanent wheel & plastic coating from CarPro, which helps repel brake dust, and other contaminants from adhering to the surface - making wheel care and maintenance effortless.
CARPRO CQUARTZ DLUX is a high-temp ceramic coating specifically built for wheels, trim, plastics, headlights, and even exhaust tips. It's formulated to withstand over 400°C, reject bonded contaminants like brake dust and iron fallout, and provide a darkened, rich finish to trim and plastics.
Unlike generic coatings, DLUX is tuned for durability on surfaces most exposed to heat and abuse. It chemically bonds to wheels and unpainted plastics, forming a semi-permanent hydrophobic layer that makes grime struggle to stick and maintenance a breeze.
From barrel to face, DLUX makes wheel cleaning safer and faster. On trim, it revives faded black plastics and seals them against UV degradation and weathering. Use it on headlights or tail lights to reduce yellowing and pitting, or on exhaust tips to resist soot and staining.
Features:
- High Temp Resistance: Handles heat over 400°C without degrading
- Contaminant Repellent: Resists brake dust, road film, and fallout from bonding to the surface
- Hydrophobic & Easy Clean: Makes maintenance as simple as rinsing off
- UV & Chemical Protection: Prevents trim fade, headlight yellowing, and surface degradation
- Restores Trim Appearance: Darkens and protects plastic/rubber trim from further ageing
Contents:
- 1x CQ DLUX (30mL)
- 4x Suede MF (10cmx10cm)
- 1x Applicator Block
- 2x CQARTZ Car Stickers
- 1x User Manual
Directions:
For best results, you need to ensure that the wheel has been completely decontaminated through the use of iron removers, and a clay bar & lubricant. It may be a good idea to try and remove the wheels, cleaning and coating the whole barrel instead of just the faces to ensure optimal results. The wheel must then be prepped with CARPRO Eraser before coating.
-
Wrap the provided suede towel around the applicator block and pour 5-6 drops of DLUX onto it.
-
Apply the product in even layers in a criss cross pattern to the surface to be coated (plastic trim, headlight or alloy wheel) ensuring you use more DLUX as required to cover the surface area.
-
Let the product cure for 10min to 1min at 10 degrees and 30 degrees respectively and wipe off the residue using the provided suede MF. or another microfiber cloth
Full Cure Notes:
- To reach maximum performance coated surface must not see rain for 24 hours after application
- If coated surface comes into contact with water during the first 24 hours it must be dried immediately
- Do not drive the car for at least 6 hours after application
- After 6 hours CARPRO Reload can be applied to help protect the coating as it hardens and cures
- If the car can be parked in direct sunlight after application this will aid in curing the coating and reaching maximum performance sooner