CARPRO CQUARTZ DLUX 30ml

• Temperature resistant (Over 400°C)
• Repels contaminants from adhering to coated surfaces
• Makes maintenance effortless
• Protects surfaces from degradation over time

• Use as a final wipe down before applying waxes, coatings or sealants
• Safe to use on all exterior surfaces
• Can be used to clean glass surfaces
• Does not contain Silicone additives, Panel Beater and Detailer friendly
• Softly scented (Unlike conventional IPA wipes)

CARPRO CQUARTZ DLUX 30ml Kit
For best results, you need to ensure that the wheel has been completely decontaminated through the use of iron removers, and a clay bar & lubricant. It may be a good idea to try and remove the wheels, cleaning and coating the whole barrel instead of just the faces to ensure optimal results. The wheel must then be prepped with CarPro Eraser before coating.

1. Wrap the provided suede towel around the applicator block and pour 5-6 drops of DLUX onto it.
2. Apply the product in even layers in a criss cross pattern to the surface to be coated (plastic trim, headlight or alloy wheel) ensuring you use more DLUX as required to cover the surface area.
3. Let the product cure for 10min to 1min at 10 degrees and 30 degrees respectively and wipe off the residue using the provided suede MF. or another microfiber cloth.

1. To reach maximum performance coated surface must not see rain for 24 hours after application.
2. If coated surface comes into contact with water during the first 24 hours it must be dried immediately.
3. Do not drive the car for at least 6 hours after application.
4. After 6 hours CARPRO Reload can be applied to help protect the coating as it hardens and cures.
5. If the car can be parked in direct sunlight after application this will aid in curing the coating and reaching maximum performance sooner.

• CARPRO CQUARTZ DLUX Kit

• CARPRO Eraser (500mL)