A cutting compound that suits a variety of paint systems, and gives REAL results.
Shine Supply Classic Cut is a highly effective compound that contains no fillers, and gives real results. It will remove moderate scratches and paint defects with ease, and reveal that shiny, wet look that everyone is chasing.
Classic Cut contains diminishing abrasives, which means the first few passes with the compound are very aggressive, but as you keep working in the product, the abrasives become finer and finer and leave a much better finish compared to other heavy cutting compounds.
If you are after a high-performance, efficient cutting compound that doesn't contain fillers, Classic Cut is perfect for you. Follow up with Shine Supply Classic Polish for a high-gloss finish.
Features
- No fillers, silicone and wax free
- Low dusting formula
- Effortless wipe off
- Works fantastic on DA machines
- Removes moderate defects with ease
- Keeps working in heat, sun and humidity without flashing
- Suits most soft and hard clear coats
Directions
- Prime the pad with an outer and inner circle of compound and rub it thoroughly into the pad face.
- Spread the product over a section of about 60 x 60 cm and set your dual action polisher to speed 5.
- Make 2 slow passes with moderate downward pressure.
- Clean or blow out the pad, apply 4 small dots of compound and cycle the same section for 2 more passes with no pressure.
- Wipe off with a clean microfiber towel. Compound the whole vehicle before moving on to your polish.
Shine Supply recommends a microfiber cutting pad on a dual action polisher, or a wool pad on a rotary.
Browse more compounds and polishes or the full Shine Supply range.