Waxit Pressure Washer Hose Fitting Kit | Bosch AQT / ARBlue / Michelin

Upgrading your Bosch AQT pressure washer hose can be tricky if you're not 100% sure on adaptors, but these hose fitting kits will help make it a bit easier.

Domestic pressure washers usually come with accessories that feel like an afterthought, such as the hose, often a cheap kinking plastic hose. Now you're likely looking at upgrading your high pressure hose to a ProPulse Uberflex or AR high pressure hose. You'll need some straightforward adaptors to get it going, so we've got a Bosch hose fitting kit that's already been figured out for you, so you can upgrade your setup quickly.

There are only two different kits to choose from. Check the variants to help compare what you're working with.

If you've already got an upgraded short gun like the MTM SG35 and are now looking at upgrading your hose, you'll want the 3/8" adaptor kit below to connect you up to your gun.

Compatibility:

• Tested and made for non-integrated hose reel models such as:
  • UniversalAquatak 36V-100
  • EasyAquatak 120
  • UniversalAquatak 125
  • UniversalAquatak 130
  • UniversalAquatak 135
  • ARBlue QC Models
  • Non Integrated Reel Michelin MPX QC Models
  • Some Older Bosch AQT Models

Features:

• High quality brass for durability: Well made brass adaptors to last through every detail.
• Turnkey Upgrade for M22 14mm Hoses: Easy to connect adaptors to change over your stock hose to a better upgraded hose like the ProPulse Uberflex or AR high pressure hose.

Pressure Hose Adaptor Kits:

• Bosch AQT Standard Hose Fitting Kit
  • 2x Bosch AQT Male Hose Adaptors (M22 14mm)
    • Connect each end to an M22 14mm female hose
    • These fittings will not work with an integrated hose reel (internally plumbed)
• Bosch AQT to 3/8" QC Female Fitting Kit
  • 1x Bosch AQT Male Hose Adaptor (M22 14mm)
  • 1x Female 3/8" QC to M22 14mm male adaptor
  • These fittings will not work with an integrated hose reel (internally plumbed)

Only upgrading your gun? See the Bosch AQT Short Gun Fitting Kit, or the full range of pressure washer fittings and adaptors.

Directions:

1. Bosch AQT Standard
   1. Screw each brass fitting into each end of your M22 14mm female hose.
   2. Connect back into your pressure washer to test fitment, and do the same for the stock gun.
   3. Should any leaks be present, use PTFE waterproofing tape to help create a better seal on the adaptor threads.
2. Bosch AQT to 3/8" QC
   1. Screw each brass fitting into each end of your M22 14mm female hose.
   2. One end will connect to your Bosch or Bosch style pressure washer, and the other will be the receiving QC end for your MTM or other 3/8" short gun. Test fitment on both sides.
   3. Should any leaks be present, use PTFE waterproofing tape to help create a better seal on the adaptor threads.