Waxit Pressure Washer Hose Fitting Kit | Lavor / Lavorwash

Looking for a new pressure washer hose for your Lavor but struggling to get it fitted? This hose adaptor kit will get you going. 

Lavor and Lavorwash pressure washes hoses have unique fittings and more often than not you're stuck using their proprietary Easy!Lock thread that only works with HD accessories. If you're looking at changing over your high pressure hose to an Uberflex or AR High Pressure Hose, you'll need some Lavor fittings to change your connectivity. We've got a hose fitting kit that's already been figured out for you so you can change over your setup easily. 

There are only two different kits to choose from. Check the variants to help compare what you're working with. 

If you've already got an existing upgraded short gun like the MTM SGS35 and are now looking at upgrading your hose, you'll want the 3/8" Adaptor kit below to connect you up to your gun. 

Compatibility:

• Tested and made for non integrated hose reel models such as:
  • SPACE180
  • RHINO150
  • VERTIGO28
  • STARGATE180

Features:

• High quality brass for durability: Well made brass adaptors to last through every detail.
• Turnkey Upgrade for M22 14mm Hoses: Easy to connect adaptors to change over your stock hose to a better upgraded hose like the Propulse Uberflex or AR High Pressure Hose. 

Pressure Hose Adaptor Kits:

• Lavor Standard Hose Fitting Kit
  • 1x M22 15mm to 14mm Hose Adaptor
  • 1x M22 14mm to Lavor Male Adaptor 
  • These fittings will not work with an integrated hose reel (Internally Plumbed)
• Lavor Standard to 3/8"QC Female Fitting Kit
  • 1x M22 15mm to 14mm Hose Adaptor
    
  • 1x Female 3/8" QC to M22 14mm male adaptor
  • These fittings will not work with an integrated hose reel (Internally Plumbed)

Directions:

1. Lavor Standard Hose Fitting Kit
   
   1. Screw each brass fitting into each end of your M22 14mm female hose.
   2. The M22 15mm adaptor end will connect to the pressure washer thread.
   3. The Lavor fitting will connect to your Lavor gun. 
   4. Connect back into your Lavor pressure washer to test fitment, and do the same for the stock Lavor Gun.
   5. Should any leaks be present, use any PFTE water proofing tape to help create a better seal for the threads of the adaptors. 
2. Lavor Standard to 3/8"QC Female Fitting Kit
   
   1. Screw each brass fitting into each end of your M22 14mm female hose.
   2. The M22 15mm adaptor end will connect to the pressure washer thread.
   3. The other will be the receiving QC end for your MTM or other 3/8" short gun. Test fitment on both sides. 
   4. Should any leaks be present, use any PFTE water proofing tape to help create a better seal for the threads of the adaptors.