Bug & Tar Removers
Koch Chemie (TEA) Teerwasche A | Special Tar & Bitumen Remover
From $29.95
Rated 5.0 out of 5 stars
1 Review
Save 20%
Frequently Asked Questions
-
If you’re starting to notice stubborn residue on your car that won’t come off with regular car washes or if you have done any long drives on highways or rural roads is often the most ideal time to look into a bug or tar remover to assist in the removal of these stubborn contaminants.
Regular use of these sprays as part of your car maintenance routine can prevent the build-up of contaminants and protect your paints finish. -
Both Bug and Tar Removers are generally safe to be used on car paint when used as directed.
However, that being said it is very important to follow the directions found on the label and avoid leaving the product on the surface for too long or in high temps, as prolonged exposure can potentially damage the paint.
Always thoroughly rinse your cars paint after using a bug or tar remover. -
Yes, bug and tar removers should be able to remove adhesive residue left by stickers, decals or tape.
-
It is crucial to read the product label before applying a tar remover to a car that has been coated, but most likely these types or products will damage ceramic coatings.
This might not be the case with newer coatings, however we recommend using bug & tar removers as a last resort. -
If you’re struggling to remove stubborn bug stains from your vehicle with a normal maintenance wash then we recommend trying out one of our specialised bug remover sprays.
These dedicated bug remover sprays are specifically formulated to target the bugs’ proteins and chemicals found inside their body that if left will eventually bind to the cars paintwork and can even possibly etch into the clearcoat if left for a long period of time. -
- Work in a cool, shaded area: avoid using the products in direct sunlight or on a hot surface as this can cause it to dry too quickly and potentially damage the paint.
- Pre-wash your car: We recommend giving your car a thorough wash and dry to help loosen up the stubborn contaminants that you are wanting to remove with the Tar X or Bug remover product. This can also help the bug and tar remover work more effectively.
- Apply generously: Spray the bug and tar remover directly onto the affected areas, making sure to cover the contaminants completely.
- Let it sit: Allow the product to sit for a few minutes, this will help break down the bug splatter and tar. NOTE: Avoid leaving on for more than 7-10 minutes.
- Gently agitate: Use a microfiber cloth to gently scrub the treated areas, this will further help to lift the contaminants without scratching the paint.
- Rinse thoroughly: It is very important to thoroughly rinse the treated area to ensure the proper removal of any left over product.
- Dry and inspect: Dry the area with a clean microfiber drying towel and inspect to ensure all contaminants have been removed. Repeat the process if necessary.
- Follow safety instructions: Always read the product label and wear gloves if recommended to protect your skin from the harsh chemicals.
Other related products include all purpose cleaners, water spot removers, clay bars and lubricants, surface iron removers, prep sprays, and full decontamination kits.