An easy-to-use paint protection kit that makes preparation simple and delivers long-lasting protection with outstanding water beading and gloss.
The Waxit Paint Protection Kit is built to give enthusiasts a smarter, faster way to achieve proper spray ceramic paint protection without the time sink or technical steps usually required.
Instead of clay bars or polishing machines, this system uses a dual-wash decontamination process followed by a surface prep and a spray-on ceramic coating. It is designed to chemically strip away embedded grime, mineral deposits and residue, leaving behind a clean, raw surface that is ready to lock in protection.
Nv SNOW+ is the starting point. This is not a standard car shampoo. It is formulated with targeted cleaners that go after embedded road grime, oils, light iron fallout and residue that pH-neutral soaps leave behind. It is safe on existing protection but strong enough to lift contaminants that would otherwise stay stuck in the clear coat. As a first step it moves the paint much closer to a decontaminated state without the use of abrasive claying.
CarPro Descale is your second wash. It removes what SNOW+ cannot, such as mineral build-up, calcium deposits and water spots that flatten gloss and interfere with coating adhesion. It uses an acidic formula to break down alkaline residue left by hard water, road salts and older detailing products. This stage gives the paint a clean and crisp surface that is ideal for applying protection, especially if you are working on a neglected or previously coated car.
Once the surface is dry, CarPro Eraser comes in as your panel wipe. It removes any remaining surfactants, oils or film from the wash stages. This ensures the surface is completely bare and uniform, which is crucial for allowing the coating to bond directly to the clear coat rather than over invisible residue that would reduce performance or longevity.
Finally, Nv JET acts as your protection layer. It is a fast-applying, slick spray coating that bonds to the paint and creates a durable hydrophobic barrier that resists dirt, water spotting and UV. Gloss is enhanced, maintenance becomes easier and the whole system can be completed in under an hour.
Together, this kit simplifies the process while still delivering results that hold up in the real world. Whether you are protecting a new car or refreshing a tired finish, it is a complete car paint protection kit that covers all the bases without overcomplicating the job.
Features
- Simplified Prep Process: This system uses a two-stage chemical wash to decontaminate the surface safely and efficiently.
- Fast Ceramic Protection: Nv JET applies in minutes and bonds quickly, leaving behind slick, glossy protection that lasts.
- Extreme Water Beading: The hydrophobic coating repels water aggressively, keeping your car cleaner for longer and making drying faster.
- Enhanced Gloss and Clarity: Removes mineral haze and surface grime, allowing the true depth of your paint to shine through.
-
Beginner Friendly: No machines, no curing, no complicated steps. Just a smart system that works.
Dilution & Directions
- Rinse the vehicle thoroughly to remove loose dirt.
- Fill your wash bucket with 10 to 15 litres of water and add 2 to 3 capfuls of Nv SNOW+.
- Wash the vehicle panel by panel using the two-bucket method, then rinse thoroughly.
- Empty your wash bucket, refill with clean water, and add 2 to 3 capfuls of CarPro Descale.
- Wash the vehicle again with Descale. Focus on areas with water spotting or dullness. Rinse off thoroughly.
- Dry the vehicle completely using a drying towel or blower.
- Spray CarPro Eraser onto a microfiber towel and wipe over all paintwork to remove residual oils.
- Apply Nv JET panel by panel using a microfiber towel. Spray directly onto the surface or towel, spread evenly and level off with a second towel if required.
Kit Contains
- 1x Nv SNOW+ 500mL
- 1x CarPro Descale 500mL
- 1x CarPro Eraser 500mL
- 1x Nv JET 250mL
- 1x 4SEASONS Orange General Purpose Microfiber
- 1x 4SEASONS Blue General Purpose Microfiber