CARPRO CQUARTZ Lite 2.0 brings all the protection and gloss you'd expect from a professional ceramic coating, in a re-engineered formula that’s easier to use than ever.
CQUARTZ Lite 2.0 isn’t just an update. It’s a completely re-engineered ceramic coating designed to give users pro-grade results without the usual prep stress or learning curve. Whether you’re a seasoned detailer or trying coatings for the first time, Lite 2.0 delivers a smoother install, better coverage, and more consistent performance across a wide range of environments.
Tested in real-world temps from 10°C to 50°C, it holds strong indoors or outdoors. Sunlight, light wind, and variable humidity don’t throw it off. This is one of the most forgiving coatings CARPRO has ever built, with predictable wipe-off and far less risk of streaking or high spots. No sticky removal. No second guessing.
But “easy” doesn’t mean weak. Lite 2.0 gives you up to 2 years of durable protection, resisting UV, chemicals, and environmental fallout. The finish is slick, high gloss, and aggressively hydrophobic with strong water behaviour and self-cleaning properties.
It’s also versatile. Use it on paint, plastic trim, wheels, glass (excluding windscreens), and even matte finishes. You can install it confidently on daily drivers, weekend cars, or customer vehicles without worrying about perfect shop conditions.
Features
- Redesigned Formula: Completely reworked for smoother application in a wider range of temps
- All-Weather Application: Tested from 10°C to 50°C for reliable results indoors or outdoors
- Real Ceramic Durability: Up to 2 years protection from UV, chemicals, grime, and fallout
- Glossy and Slick Finish: Leaves a deep, clear gloss with strong hydrophobic performance
- Multi-Surface Safe: Works on paint, wheels, glass (excluding windscreen), plastics, and matte finishes
- Forgiving and User-Friendly: Ideal for beginners, DIYers, or mobile pros looking for an easy-to-use car ceramic coating
Directions
- Fully decontaminate the surface using CARPRO IronX, CARPRO TarX, and clay.
- Wipe down with CARPRO Eraser to remove oils and residue. Ensure the panel is cool and dry.
- Shake the bottle well and apply a line of product to a microfiber applicator or suede-wrapped applicator block.
- Apply in a criss-cross pattern to a 60 cm x 60 cm section, with complete coverage and an even layer.
- Allow at least 5 minutes to flash, then remove the excess with a clean microfiber towel. It can be left for up to 15 minutes and still wipe off easily.
- Check under a light source for any high spots and remove them.
- For missed smears or high spots, apply a few drops to your applicator, wipe over the area and buff off straight away. This can be done up to 2 hours after application.
- Let the surface cure for at least 4 hours before it gets wet. Remove any water drops during the first 24 hours before they dry.
- Use CARPRO Reload 2.0 4 hours after application to protect against water spots during the first 48 hours.