Pressure Washer Hose Fitting Kit | Ryobi / Ozito

These durable brass hose fittings will help you upgrade the plastic hose that often comes with Ryobi, Ozito and other similar models.

If you're wanting to get rid of the nasty kinking plastic hose your machine uses, you're likely looking at upgrading your high pressure hose to an Uberflex or AR high pressure hose. You'll need some straightforward adaptors to get it going, so we've put together a Ryobi hose fitting kit that's already been figured out for you, so you can upgrade your setup quickly.

There are two kits to choose from. Check the variants to compare what you're working with.

If you've already got an upgraded short gun like the MTM SG35 and are now looking at upgrading your hose, you'll want the Ryobi QC to 3/8" QC Gun kit below to connect you up to your gun.

Compatibility:

• Tested and made for non-integrated hose reel models such as:
  • RACPWS7
  • RACPWS8
  • RACPWS5
  • RACPWS6
  • RACPWS1
  • RACPWS2
  • RACPW140
  • HPW-1160
  • HPW-2030
  • Some older QC models

Features:

• High quality brass for durability: Well made brass adaptors to last through every detail.
• Turnkey Upgrade for M22 14mm Hoses: Easy to connect adaptors to change over your stock hose to a better upgraded hose like the ProPulse Uberflex or AR High Pressure Hose.

Pressure Hose Adaptor Kits:

• Ryobi QC Standard
  • 2x Ryobi Male Hose Adaptors (M22 14mm)
    • Connect each end to an M22 14mm female hose
    • These fittings will not work with an integrated hose reel (internally plumbed)
• Ryobi QC to 3/8" QC Gun
  • 1x Ryobi Male Hose Adaptor (M22 14mm)
  • 1x Female 3/8" QC to M22 14mm male adaptor
  • These fittings will not work with an integrated hose reel (internally plumbed)

Directions:

1. Ryobi QC Standard
   1. Screw each brass fitting into each end of your M22 14mm female hose.
   2. Connect back into your pressure washer to test fitment, and do the same for the Ryobi gun.
   3. Should any leaks be present, use PTFE waterproofing tape to help create a better seal on the threads of the adaptors.
2. Ryobi QC to 3/8" QC Gun
   1. Screw each brass fitting into each end of your M22 14mm female hose.
   2. One end will connect to your Ryobi / Ozito pressure washer, and the other will be the receiving QC end for your MTM or other 3/8" short gun. Test fitment on both sides.
   3. Should any leaks be present, use PTFE waterproofing tape to help create a better seal on the threads of the adaptors.