Allround Textile Sealant protects all types of textiles against water, dirt and stains without altering the look and feel of the surface. The water-based textile sealant from Koch Chemie is free from solvents and fluorocarbon resins.
The sealing components make cleaning and protecting easier, and the pleasant, fresh fragrance makes it suitable for indoor as well as outdoor use.
Durability is up to 24 months (comparable to up to 50 washes at 30°C), depending on the fibre type, application, wear and care. For best results, clean the textile first with Koch Chemie Pol Star.
Protects all types of textiles against water, dirt and stains.
Pleasant, fresh fragrance.
Easy-to-clean effect and a long service life.
Durability is up to 24 months.
Thoroughly clean the textile to be sealed, e.g. with Koch Chemie Pol Star, and allow to dry completely. The textile must be dry, clean and free of product residues for the next steps.
Cover surfaces that are not to be sealed with masking tape.
Shake before use, and check for suitability and compatibility before use.
Apply Allround Textile Sealant evenly to the surface with a microfiber sponge to create a thin and even wet film.
Work the product thoroughly into the fibres with a suitable sponge in a crosswise motion and then allow to dry completely.
An application temperature between 10°C and 40°C is recommended.
Depending on the textile and ambient temperature, complete drying and development of the effect takes up to 24 hours.
Only gently clean the sealed surfaces after using Allround Textile Sealant.
Note: If the effect wears off, it can be refreshed by reapplying the product, as long as the textile is not heavily soiled. Do not apply to surfaces where slipperiness is undesirable, or to displays or polycarbonate. Protect from frost and excessive heat.
