CARPRO ALLiN | All In One Polish
A one step polish that cuts, glosses and leaves a hydrophobic layer in a single pass, with an easy wipe-off for enthusiasts and detailers.
You save $5.99
CARPRO ALLiN | All In One Polish · 250g$23.96 About CARPRO ALLiN
Correction, gloss and protection from one bottle, when a full multi-step job isn't on the cards.
Not every car needs a three-step correction. Sometimes it's a mobile job with a tight window, a customer who wants it looking sharp by Friday, or your own car that just needs a lift before a weekend away. That's where a good one step polish earns its spot on the shelf.
ALLiN is CARPRO's water-based all in one. In a single pass on a dual action polisher, it removes defects up to 2500 grit sanding haze, refines the paint to a high-gloss finish, and leaves a hydrophobic base layer behind. Full water repellency comes in after 24 hours.
We've had it on the bench, and it's super easy to use. It works down to clear without fuss, the wipe-off is great, and the gloss is awesome for a one-step product. The water behaviour afterwards is exceptional too. It's a proper all in one polish, not a glaze that washes away.
Pair it with a soft finishing pad. We've had great results with the CARPRO Gloss Pad and the ShineMate Black Diamond Grey and Red foam pads. For heavier defects, a dedicated cutting compound first is better suited.
Want more protection afterwards? Top it with a spray coating like Reload 2.0. If you're laying a ceramic coating over it, wipe the panels down with CARPRO Eraser first so the surface is completely oil-free.
It's the one we reach for when time's tight and the finish still has to be spot on.
Specifications
- Type: Water-based one step polish (cut, polish and protect)
- Cut: Removes up to 2500 grit sanding haze
- Machine: Dual action polisher, speed 3.5 to 4
- Section size: 40 x 40cm
- Water repellency: Full after 24 hours
- Sizes: 250g, 500g
Directions
- Prime the pad and apply 3 to 4 pea-sized drops of ALLiN.
- Work a 40 x 40cm section at speed 3.5 to 4 on your DA.
- Use a cross-hatch pattern with zero pressure.
- Keep polishing until the residue turns completely clear.
- Wipe away the residue with a clean, plush microfibre towel.
- Clean the pad between sets to keep the cut consistent.
- Before applying a ceramic coating, wipe down with Eraser.
Shipping & returns
Free shipping over $150 (excludes Dangerous Goods and Bulky Items). Dispatched same day for orders before 2pm. 30-day returns on unopened products. Learn more ›
Easy Wipe-Off
Works down to clear without a fight and wipes off cleanly. In our testing, it's one of the easiest AIOs we've used.
Awesome Gloss
Refines the paint to a high-clarity, high-gloss finish that you'd expect from a dedicated finishing polish.
Water Behaviour
Leaves a hydrophobic base layer, with exceptional beading once it's fully cured after 24 hours.
Coating Ready
Plan to coat afterwards? An Eraser wipe-down clears the panel so your ceramic coating can bond.
Removes up to 2500 grit haze and leaves a hydrophobic finish in a single pass on your DA.
Common questions
Is ALLiN right for me?
Which pad should I use?
Can I use it by hand or with a rotary?
Can I ceramic coat over it?
Related Products
20% off