CARPRO RinseX | Rinseless Wash Concentrate
A slick rinseless wash for a bucket-and-towel clean. It also works as a pre-soak, clay lube, drying aid and quick detailer.
You save $6.99
CARPRO RinseX | Rinseless Wash Concentrate · 500mL$27.96 About CARPRO RinseX
A concentrated rinseless wash that softens traffic film, oil and road grime so it comes away cleanly in your towel.
Not every wash needs a hose and a foam cannon. RinseX is CARPRO's dedicated rinseless wash, made for when a proper rinse isn't an option or you just want the car clean quickly: a bucket of solution, a stack of plush microfibre towels, and one panel at a time.
It's non-foaming and very slick, so the towel glides over the surface instead of dragging dirt across it. There are no silicones, gloss enhancers or protection in the mix. It's a straight clean, with a light berry scent while you work.
One bottle covers more than the wash, from prep through to the final wipe-down. Each job just needs a different strength, and they're all set out in the Directions tab.
If you'd rather top up your protection as you clean, CARPRO ECH2O is the better fit. RinseX is for when you only want it clean.
Have plenty of plush towels on hand, such as Aquatouch ACE. Add a PolyShave MF Clay Cloth if the paint needs decontaminating, keep a CARPRO Dilute bottle for your spray mixes, and finish with a proper drying towel like the CARPRO DHydrate.
Directions
Rinseless wash
- Add 25 to 33mL of RinseX to a 10L bucket of clean water (1:400 to 1:300). One cap is about 10mL.
- Soak your towels or sponge in the solution, then wring them out so they're wet but not dripping.
- Wipe one section with a single light pass, using no pressure.
- Flip to a clean side and repeat the pass over the same area.
- Dry the panel fully before moving on.
- Swap to a clean towel, or rinse it in a second bucket, as you go.
Pre-soak (for dirtier cars)
Mix 3 to 7mL per 1L in a pump sprayer (1:300 to 1:150). Spray it on, let it dwell, then wash as above.
Other uses (per 1L spray bottle)
- Clay lube: 2.5 to 3.5mL (1:400 to 1:300)
- Drying aid: 2 to 2.5mL (1:500 to 1:400)
- Quick detailer or post-polish wipe: 3 to 7mL (1:300 to 1:150)
Shipping & returns
Free shipping over $150 (excludes Dangerous Goods and Bulky Items). Dispatched same day for orders before 2pm. 30-day returns on unopened products. Learn more ›
Slick and Non-Foaming
High lubrication lets the towel glide and lift grime, and with no foam there's nothing to rinse off.
Nothing Left Behind
What you see after a wipe is the real finish, with no added gloss covering anything up.
One Bottle, Five Jobs
Rinseless wash, pre-soak, clay lube, drying aid and post-polish wipe, all from the same concentrate.
Wash Without a Hose
A bucket, a few towels and a spot to park is all you need for a full clean.
CARPRO RinseX, in action
RinseX is CARPRO's newest wash concentrate, joining Reset and ECH2O in the CARPRO wash range.
Common questions
Is RinseX right for me?
If you can't use a hose, are short on time, or want to clean between full washes without the setup, yes. On a really dirty car, pre-soak first so the grime softens before you wipe.
What's the difference between RinseX and ECH2O?
RinseX is a rinseless wash: mixed in a bucket, wiped on with a soaked towel, then dried. It only cleans. ECH2O is a waterless wash you spray on and wipe off, and it leaves SiO₂ protection behind. Pick RinseX for a straight clean, and ECH2O to top up as you go.
Is it safe on my coating?
Yes. It's safe over waxes, sealants and ceramic coatings. Because it adds nothing of its own, it won't change how your protection looks or behaves.
