Nv PURGE.
Touchless Method

1. Liberally spray NV PURGE over the entire wheel area
2. Allow it to dwell for up to five minutes or before it starts to dry.
3. preferably using a pressure washer, rinse the whole wheel area down thoroughly.

1. Rinse the wheel area first to remove as much loose dirt and grime as possible.
2. Spray purge over the wheel area allow it to dwell.
3. Using a section of wheel brushes you can physically agitate and remove the dirt and contamination for a more in depth cleaning process.

1. Apply a bead of Nv ONYX along your applied applicator.
2. Begin wiping and massaging the dressing into the tyre wall as evenly and consistently as possible.
3. For a slightly glossier satin finish just allow Nv ONYX to dry on its own accord for an hour or so before driving the vehicle, for a more matte to satin finish you can use a cloth to wipe and level the dressing down and hour after applying it.

1. Rinse tire well.
2. Spray ReTyre generously onto the rubber, let it foam and dwell for 30 seconds.
3. Spray onto a medium hard brush and agitate.
4. Rinse the rubber and the brush thoroughly.
5. Repeat until suds on rubber are white.
6. After fully dried, protect tires with Carpro Perl or Carpro Blackout.

• Economax Detailing Wheel Bucket
• Economax Microfiber Wheel Brush (Straight Brush)
• Economax Tyre Brush
• NV PURGE (1L)
• Nv ONYX (500mL)
• CarPro Retyre (1L)
• Nv Foam Applicator Block